The ISO-200 isolation stand is 7.8” (200mm) wide x 10” (255mm) depth and is rated for monitors weighing up to 60lbs. The ISO series is the latest generation of IsoAcoustics stands designed for studio monitors. The ISO series is an updated version of the popular ISO-L8R series and features a lower profile, new frame design and a newer version of isolator for improved performance. Offering 14 variations of height and tilt, the ISO-200 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the speaker cones, providing greater clarity and focus. Perfect for optimizing the placement and performance of small studio monitors… An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands. Patented IsoAcoustics Isolation: Exciting the supporting surface The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms. Reducing internal reflections Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound. Specifications: Floor/Desktop: Desktop Application: Studio Monitors Material: Aluminum Maximum Height: 8.75″ Weight Limit: 60 lbs. Width: 7.8″ Depth: 10″
Distinctive and luxurious wedding band featuring a contrast of rich yellow gold and oxidized silver.
The ring is made of sterling silver, slightly textured with reticulation and oxidized.
Gold spots are solid 18k gold. It is a random mix of gold dust, micro granules and solder fused to the silver surface.
The edges and inside of the ring are solid 18k yellow gold.
Most of the ring’s weight is gold, silver is used only as a base for my Gold Chaos technique. This technique isn’t possible with any other metal.
Gold edges and inside made the ring not only more luxurious but also sturdier and more scratch resistant than silver only rings.
It has a nice weight to it (approx. 7-8g depending on size), but it is not too heavy. Rounded edges make the ring very comfortable.
The silver part is oxidized and polished. Patina is already polished on the high spots and stays in the deeper parts.
Due to the technique used, every ring is unique with a different texture.
Width: 8 mm
Gold edges are 1 mm wide.
Thickness of the ring is approx. 1.4 mm.
The ring will be shipped with safe express shipping.
Please see other rings in the Gold Chaos collection. I am open to custom orders and I can make rings with different amounts of gold and/or different width etc.
